• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • NOTICE: This "Classifieds" forum is expressly for posting items for sale or wanted. Post any technical question in the appropriate marque forum!

    IMPORTANT: Please be aware that there are a lot of scammers on forums like this, so please exercise due diligence as we can't be responsible for transactions between members. See this thread for at least one type of scam to be aware of: Private Message Scam (there may be others)
    If you are suspect of a member being a scammer, please send me a PM with details.

Tips
Tips

Wanted 3.4 Cylinder Head

Share this page

T

tim66ah

Freshman Member
Offline
Looking for a good used Jaguar 3.4 cylinder head for my 1967 mk2. This car has the KJ prefix head. It has a tach generator. I would consider any 3.4 head. My original head has internal corrosion that is not repairable.

Thanks,
Tim
 
Try terry's jaguar parts.
 
Thanks. I used a 4.2 head. The 4.2s have different cylinder spacing, but the combustion chambers are the same as the 3.4. Two extra water holes at the aft end of the head need to be plugged. I tapped holes and installed pipe plugs. I then used straight port intake and two 2 inch SUs.
 
Back
Top