• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Spitfire 1976 spitfire rear bumper question

Share this page

D

Dan76spit

Senior Member
Offline
hi all,
i have a 1976 spitfire and i have taken off the rear rubber bumber overrider things and the larger center bumper section cover. i figured this would clean up the look of the rear of the car. my question is can i remove the frame extentions and leave the overriders off? It seams to me that the only reason they are there is to support the overriders. Just wondering if i can do this thanks all.
 
The government dictated the use of those overriders, when did they change ? Bob
 
I have seen a few around here that drive around with the overrides off. Here in MD you don't need to pass any real inspection to get a "historic" plate. Next time I see one I will snag you a photo.
 
Here is what it looks like. Notice I have antique plates so I do not need an inspection in RI. The brackets and frame extensions were not on the earlier Spits. You can remove the brackets and fill the holes with chrome head bumper bolts for a nice clean look. I doubt the over riders would be much help if you were rearended, mostly for the parking lot bump.

1975Spitfire243.jpg
 
Back
Top