• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 1973 TR6 Front License Plate Bracket

Share this page

jerrybny

jerrybny

Jedi Knight
Offline
Hi all. I'm a pround new owner of a 1973 TR6. I was wondering if anyone knew how I would mount a license plate to the front. New York requires a plate in the front. I down see any holes or anything. I looked in Moss and a few other online part suppliers and they don't seem to list them for my year, yet I see pictures of 73 TR6's with them mounted. Any help would be greatly appreciated.

Jerry
 
Hi Jerry. There are 2 routes to take here: lurk on ebaY and wait for a factory plate holder to show up or improvise like I did. By the way, the factory holders usually auction at a very high price. Anyway, go to Lowes/Home Depot and get a couple of straight decking reinforement plates (straps). These are galvanized steel and have a series of holes punched in them. You should have 2 holes drilled through the underside of your bumper. Bolt up the end of each plate to the hole and bend the plate to match the bumper contour. Attach your license plate holder that you bought from Pep Boys or wherever through the upper bolt holes and your're done.

Good luck.

Rick O.
72 TR6
 
Back
Top