• Notice: If you're posting to get rid of the little man (Lucas), please post A NEW TOPIC with something meaningful. Tell us about yourself and your interest in British cars. You need not share anything too personal. NOTE: this New Member's Forum is only to introduce yourself. If you have specific questions about your little British car, please post those in the appropriate marque-related forum.
    Thanks and welcome to BCF!
    Basil
  • Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

1971 TR6, trunk floor is too hot

MEHEFFEY

Freshman Member
Country flag
Offline
As a new member not completely sure how to correctly post a question but I figured someone will let me know if I'm doing it wrong.

We live out in the beautiful pacific northwest and after a 3 year (ongoing) battle we finally have our TR back on the road.

We drive the car pretty much daily now, for about 40 mins to an hour and we noticed that the trunk floor was get extremely hot. It's hot enough to burn the skin if you were to leave it there for more than just a quick touch.

We are using the stock exhaust and mounts which seem close the body anyway. Exhaust flow is good and there is no restriction from the mufflers tailpipes.

Any ideas would be appreciated.
 
first of all, welcome, would love to see pics of the car! First of all, as you rightly surmised, this isn't exactly where you should be posting this question. This is really just for introductions. Then you would post the question in the Triumph section. That said, this sounds like a slightly extreme example of a typical problem. Assuming the exhaust is fine (as you mentioned) these cars just don't have the insulation modern cars have, (the real problem is for people like me who get the heat in the cockpit.

There are lots of modern heat shields that glue in. Dynamat is the best known but there are alternatives - peel and stick. To make it pretty you can then get a piece of upholstery to cover it and you would be good to go.

good luck! and welcome.
 
first of all, welcome, would love to see pics of the car! First of all, as you rightly surmised, this isn't exactly where you should be posting this question. This is really just for introductions. Then you would post the question in the Triumph section. That said, this sounds like a slightly extreme example of a typical problem. Assuming the exhaust is fine (as you mentioned) these cars just don't have the insulation modern cars have, (the real problem is for people like me who get the heat in the cockpit.

There are lots of modern heat shields that glue in. Dynamat is the best known but there are alternatives - peel and stick. To make it pretty you can then get a piece of upholstery to cover it and you would be good to go.

good luck! and welcome.

Thanks

Here's a quick pic of our TR6
 

Attachments

  • IMG_3168[1].jpg
    IMG_3168[1].jpg
    73.6 KB · Views: 49
lovely! thanks for sharing
 
Great looking TR6.

Have you posted your question in the Triumph section? You are sure to get some good information there.

David
 
Back
Top