Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Just bought a surrey top replacement in Fabric, it does not have the pocket to insert the stiffeners, it includes plastic stifenners instead but it doesnt hold the hood when I insert it into the windhsield slot, I bought the metal stiffeners that have the holes in them + the rivets (refer to image).... do I have to drill the holes on the plastic stiffener attached to fabric hood.... Im worry the rivets wont fit in the slot..Please help if anyone has an image.
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
TR4/4A 1963 TR4 soft hood cover with attached plastic stiffeners
- Thread starter RickyG
- Start date
Share this page
Offline
My 63 was a surrey car. The metal strips float in the fabric seam. I found it necessary to set
them with a soft block of wood when the top went up.Otherwise the wind would suck it up.
I dont think the diagram is at all what you need to see .Tr4A.
But if your top has no seam to hold the stiffeners I would send it back. Dont modify it or you own it.
Mad dog
them with a soft block of wood when the top went up.Otherwise the wind would suck it up.
I dont think the diagram is at all what you need to see .Tr4A.
But if your top has no seam to hold the stiffeners I would send it back. Dont modify it or you own it.
Mad dog