1957-8 MG Magnette, HELP!!!

[CZ_Dave]

Ok, so a auto shop calls me in a panic,
"you do MG's, right?" he ask, Yeah MGB's that is.
"What about Magnette's cuz I got me a real problem
here. I have had this Magnette sitting here for
6 months, and now I am down to the nut on it and can't seem to find a good part here. I need a combination clutch/brake cylinder. It has 1 reservoir and 2 pistons/levers coming out of the bottem of it. I have got 3 bad ones from Scarborough Fair, so I don't trust them anymore, can you help me?"
I asked if he inspected the original and to see if it was rebuildable (pitting on the inside of the cylinder/sleve's. Found one at Kip's, cost $949 vs rebuild kit on Ebay for $49.
Any suggestions? Anybody else carry these parts? Not Moss or Victoria British.

 

[Flash_Harry]

Here's a source in the UK - still pretty expensive for a re-sleeved unit.

https://www.mgspecs.co.uk/parts_list.htm

Harry

 

[JPSmit]

Jeff Schlemmer at Advance Distributors drives one - he might know

 

[DNK]

Jeff Schlemmer at Advance Distributors drives one - he might know

Well ,...that explains that!

 

[swift6]

Are they same as MGA's? Still expensive if I recall but it may broaden the search parameters.

 

[AngliaGT]

Kelvin at Moss Motors drives one also.

- Doug

 

[Billm]

You might try this:
https://www.bpnorthwest.com/.sc/ms/dd/ee/10505/Brake%20Master%20Sprite%20Midget%201098

or

Sierra Hydraulics:
https://brakecylinder.com/spridgetbrakes.htm
the 7/8" MC is the same as for an MGA, don't know about the Magnette.
They sleeve/rebuild them.

BillM

 

[CZ_Dave]

All fixed nwow guys, problem solved
Thank you for all the inputs,
Moss Motors helped out,
once more the saviors.