• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

1955 BN1 front shroud

Share this page

T

Tyrone

Freshman Member
Offline
Hi, I've got the front shroud off the car and want to have it repaired. My problem is that both pieces of the shroud that connect to the frame brackets are broken off. I'd like to have new pieces welded in place but have no idea what it should look like under there. The frame brackets have vertical holes, while it seem as though the shroud holes would be horizontal. I've looked for photos but can't seem to find any. A photo, discription, or drawing would help.
Thanks,
Tyrone- lotfreeport@optonline.net
 
G'day Tyrone, If you have access to a copy of the Austin-Healey 100 Service Manual turn to page P/3 in the bodywork section. Fig 7 shows the shape of the bottom flange of the front shroud and item 3 is listed as 'cowl nuts'.
 
Back
Top