• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

1955 BN1 front shroud

Share this page

T

Tyrone

Freshman Member
Offline
Hi, I've got the front shroud off the car and want to have it repaired. My problem is that both pieces of the shroud that connect to the frame brackets are broken off. I'd like to have new pieces welded in place but have no idea what it should look like under there. The frame brackets have vertical holes, while it seem as though the shroud holes would be horizontal. I've looked for photos but can't seem to find any. A photo, discription, or drawing would help.
Thanks,
Tyrone- lotfreeport@optonline.net
 
G'day Tyrone, If you have access to a copy of the Austin-Healey 100 Service Manual turn to page P/3 in the bodywork section. Fig 7 shows the shape of the bottom flange of the front shroud and item 3 is listed as 'cowl nuts'.
 
Back
Top