Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
algot1901
Jedi Hopeful
Offline
I have a problem with my brakes, the linings are riveted (I would never trust bonded) but the rub comes with the dimensions 30mm wide by 5mm in thickness and according to small spares in England the linings are 30mm wide by 4mm in thickness, without a brake machine I would never be able to grind 1mm off the linings and keep them in tolerance over the entire surface here is there responce "
We sent you the 7W-2021 linings which should measure 30mm wide x 4mm thick and have not had any feedback back saying they do not fit.
Please advise"
Here is a set of linings for one axle with the number 7Y-103E see photo. So any ideas how to grind 1mm off the entire lining
We sent you the 7W-2021 linings which should measure 30mm wide x 4mm thick and have not had any feedback back saying they do not fit.
Please advise"
Here is a set of linings for one axle with the number 7Y-103E see photo. So any ideas how to grind 1mm off the entire lining
