• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

150hp cam vs ?cam for rebuild

The pump I ordered from Summit was supposed to be low pressure (no more than 6PSI). It puts out over 15. A different pump is on order and I'm waiting for it to arrive...

On the up side removing the stuff in the trunk seems to have helped a little with the flow from the stock pump.

On the down side the (remanufactured) Toyota tranny is leaking like crazy out of the rear seal - with 10 miles on it and out of warranty because the whole deal has taken so long...

No matter what I'm taking a break from mods until after next summer, and I'd like to be able drag it to VTR - its only 3 hours from me this time round. I *have* to get some driving in before it comes off the road for the next round of changes.

I was thinking of rewiring it though as a nice filler winter project - assuming I get it back before winter...
 
Too much pressure is certainly a bad thing. Good luck with getting some drive time back in before the next round. Give yourself and your mechanic a break once you get it up and running reliably anyway.

/ubbthreads/images/graemlins/cheers.gif
 
Back
Top