Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Morris
Yoda
Offline
I tore into my gearbox because it was making a clinky-clinky noise in first gear. I was pretty sure it had something to do with the reverse idler, and low and behold the idler gear was shredded. That is replaced and everything else looks pretty good except...I noticed that there is a lot of play in the reverse idler spacer. I am wondering if that could be the source of the clinky-clinky noise.
What do you guys think?
Ps. The Haynes Manual instructions for removing the speedo gear are complete bunk. Ignore them. The speedo gear taps off easily with a dull chisel at the base.
What do you guys think?
Ps. The Haynes Manual instructions for removing the speedo gear are complete bunk. Ignore them. The speedo gear taps off easily with a dull chisel at the base.