• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

1275 oil pump, camshaft adapter

Share this page

Rut

Rut

Obi Wan
Country flag
Offline
Just saw that BPNW now has an adapter for the A+ pump to 1275 cam adapter...slot to star?
Rut
 
Are you talking about CHM108MOD? If so, that's a good price. Literally 1/2 what Mini Mania sells it for.
 
I recently had to have my oil pump replaced on my 1275. It turned out that what I had was an oil pump for a 948. The slot for a 948 is shorter than for a 1275 and eventually wore down and didn't make contact anymore. It was replaced by a oil pump from Mini Mania and all is good now.
You can see a discussion of it in MG Experience under posts started by Bill M. Luckily it was caught in time and no damage was done.
 
Back
Top