• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

1275 head gasket

Share this page

dingleberry3343

dingleberry3343

Freshman Member
Offline
I am building a 1275.

Which side is the haed side on the head gasket?

The steel liner on the gasket is solid between the bores on one side and not on the other. Does this go up or down?

Thanks

Tony
 
It ~should~ have the word "FRONT" stamped on it, then you can match up the thing only ONE way.

HTH
 
dingleberry3343 said:
I am building a 1275.

Which side is the haed side on the head gasket?

The steel liner on the gasket is solid between the bores on one side and not on the other. Does this go up or down?

Thanks

Tony
Click to expand...

Tony, it's odd that it's not marked top and front, most head gaskets are, but all the gaskets as you described I've worked with with the steel liner/fire ring joining between the bores, that side wnet towards the block.
 
Same here. What kind (brand) of gasket IS it? I can't recall ever seein' an unmarked one either. Odd.
 
I've had one with no markings, came from one of the usual suspects. Doc, Remember the thread where the gasket didn't have the oil galley hole?
Tony, get a Payen.
 
Ah-HAH!!! Counterfeit!!

Payen, aye!
 
Back
Top