• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

12 V outlet installation

Share this page

John_Mc

John_Mc

Jedi Knight
Offline
I'm getting ready for a long drive in my TR6 starting tomorrow night (Thursday) and I'd like to have my phone always at the ready (plus it will double as my radio). Are there any special considerations when installing a 12V outlet? The one I picked up from Radio Shack has an inline fuse. I will be passing through Las Vegas on Friday where the predicted high temperature is supposed to hit 106. Any of you AZ guys have any advice/warnings for such temps?
 
Pretty straight-forward and as you describe. You'll want to think about whether you want the power switched (w/ignition) or always on. Does your ignition switch has an accessory position? If so, that would seem like one useful connection.

I did mine on a little plywood panel hidden under the dash -- had to use wood as it was a negative ground set-up in a positive ground car:

TR3%2012V%20Socket.JPG


As for heat -- on long hot drives I carry a spray bottle of water (one with an adjustable nozzle) set to spray a fine mist. Makes a crude swamp cooler but really helps. I usually have the top up for shade (with back window unzipped and front vent open).
 
Geo Hahn said:
on long hot drives I carry a spray bottle of water (one with an adjustable nozzle) set to spray a fine mist. Makes a crude swamp cooler but really helps.
Click to expand...

geo, is that for you or the car? :jester:
 
Assuming John that the cooling system is happy and you have the shroud on it?

Cold beer/ice tea waiting for you if you come through OC/LA!
 
Back
Top