• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

100-4 front shock replacement

Share this page

bighealeysource

bighealeysource

Luke Skywalker
Country flag
Offline
Hey all,
I got great advice on how to handle taking off the old
front shocks on my 100-4 - used the floor jack under the
spring system which worked great. However, HOW DO YOU
COMPRESS THE TOP LINK BUSH DOWN to get the fulcrum pin
into place ????? Any help will be greatly appreciated.
Thanks,
Mike
 
bighealeysource said:
Hey all,
I got great advice on how to handle taking off the old
front shocks on my 100-4 - used the floor jack under the
spring system which worked great. However, HOW DO YOU
COMPRESS THE TOP LINK BUSH DOWN to get the fulcrum pin
into place ????? Any help will be greatly appreciated.
Thanks,
Mike
Click to expand...
Take out the bolt holding the two arms together and drive a wedge between them. You should get the clearance you need.

Mentioned that in the PM...
 
Ooh rah ! Knew someone would come to my rescue. Just got the new rebuilt shocks
back from Apple and will take that bolt off and spread the arms to get that extra
1/8 inch per side so I can get the thing back on ! Thanks Randy.
Regards,
Mike
 
Back
Top