• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

100-4 front fender removal

Share this page

R

rossco

Jedi Trainee
Country flag
Offline
1) There is a support on the top of the inner fender that goes to the seam at the fender and the engine shroud. There are two bolts. Do those have to come out to remove the fender or are they only there to support the shroud?
2) There is a bolt behind the wiper motor on the drivers side. Is it standard procedure to remove the wiper motor to reach that bolt? That would be a cruel joke. Is there a way to cheat it out?
 
rossco said:
1) There is a support on the top of the inner fender that goes to the seam at the fender and the engine shroud. There are two bolts. Do those have to come out to remove the fender:--- NO!!!!

or are they only there to support the shroud?
2) There is a bolt behind the wiper motor on the drivers side. Is it standard procedure to remove the wiper motor to reach that bolt? That would be a cruel joke. Is there a way to cheat it out?----- NO !!!
Click to expand...
 
Back
Top