• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

tr4 a

  1. M

    TR4/4A Is there a difference between the "Body" number and the Comission Number?

    I am filling out the request for a heritage certificate and it requests the Chassis/VIN Number, Engine Number and Body Number. I have the first 2, but wonder if there is a Body number as well. Thanks for your help!
  2. M

    TR4/4A TR4 A Comission Numbers?

    Can anyone suggest where I can find an accurate resource for these numbers? Mine was sold to me as a 67', but I think it might actually be a 66'. The number is CTC 70414L. Any insight from you guys would be very helpful. Thanks, Mark
  3. B

    TR4/4A Tappet wear pattern inspection - normal or not ?

    I have a 67 TR4A with 144k total miles and 50k miles since cam R&R and bottom rebuild. Took the head off to repair a broken manifold stud (manifold side ports were out (-6 and -23 mil with respect to center port) ... the -23 side is where the manifold bolt broke... Anyway... I pulled the...
    • blhazzard
    • Thread
    • head rebuild tappets tr4 tr4 a
    • Replies: 13
    • Forum: Triumph
  4. V

    TR4/4A Triumph TR4 A clutch assembly and gearbox

    Hi, The clutch of my 1966 Triumph TR4A is worn out... so I will need a replacement. Can anyone tell me if it is possible to replace the clutch from underneath the car? (wihout having to dismantle gearbox tunnel, lower dash, carpets, etc... on the inside) Or is this only possible from the inside...
    • Valenciablue
    • Thread
    • assembly clutch tr4 a tr4a triumph
    • Replies: 6
    • Forum: Triumph
Back
Top