• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

spark

  1. tr6web

    TR6 No spark 1972 TR6

    To continue from a previous post, but more description subject line... Car started fine, then just died. Got a spark tester.. no spark. Changed points, rotor arm and condenser, installed new Lucas sports coil. Even removed the distributor and cleaned it up. Still no spark. Not sure if I need to...
  2. T

    100-6 start up issues

    CV19 has given me a rare chance to spend some time with my 100-6. However, my first journey was cut short when it just cut out. The car has a Pertronix ignition fitted, and was running fine before the above happened. There's a healthy spark at the coil, but nothing at the plugs. I've looked...
  3. S

    Wedge Need help with TR8 no spark

    Oh LBC gurus -- help please, as this one has me baffled! '80 TR8 dual Stromberg car that when I got it had spark, bad fuel pump and dying starter. Would run on starting fluid. I put in a new fuel pump and starter and now has no spark. Figuring I toasted the Lucas Opus distributor, I just...
  4. J

    TR6 TR6 died/ won't start

    2 weeks ago I had been driving my 1974 TR6 for about 70 miles and it died out shortly after leaving a stop light, about a mile from my house. The car just died out with no warning, and was not running rough or showing any other signs. I checked the fuel and the spark and discovered the fuel was...
  5. H

    Ignition Switch Bypass Help - '61 Bugeye

    Just bought a '61 Bugeye with a 948cc engine. It's a beautiful car, but it didn't come with a key or a wiring harness installed. I wanted to see if the engine runs, or if I need to pull it for a rebuild before going about installing the new wiring harness (which is a touch overwhelming..). I...
Back
Top