• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BN6 Soft Top Webbing

Share this page

OP
nevets

nevets

Jedi Knight
Country flag
Offline
I need to replace the two strips of webbing on my BN6 soft top because they were damaged by mice during winter storage. I'm unsure about how the webbing strips attach to the heavy front frame member (the part that gets mounted to the windshield). Anyone have any experience with this? Suggestions would be greatly appreciated.
 
Sort by date Sort by votes
Pretty sure they are between the wood and the softop fabric . They are wrapped over the top of the wood and stapled to it . Then covered by the softop fabric and frame to windshield seals etc
 
Upvote 0 Downvote
Thanks HN. Just so I am clear, will I need to remove all the screws from the underside of the frame member (visible in the attached picture) plus the two corner screws located on the upper side of the frame member? Arrow indicates point of insertion of the webbing.
soft top webbing.jpg
 
Upvote 0 Downvote
Back
Top