-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
BJ7 Rear seat Back
- Thread starter rjc157
- Start date
Share this page
British_Recovery
Jedi Warrior
Offline
There are two vertical metal sections - one on each side - that have slots for a rubber securing block similar to that for the bonnet rod and boot rod. On the back of the seat back, there should be a chrome footman's loop on each side that will line up with the rubber, and allow the back to be pushed into position.
Bob
Bob
tahoe healey
Yoda
Offline
Any photos? I'm not understanding footman's loop or where there would be the rubber securing block. I have an early Phase 1 BJ8. They should be the same???
TH
TH
maxwedge5281
Jedi Warrior
Offline
Online
That looks like a BJ7. It's definitely not a BJ8.
British_Recovery
Jedi Warrior
Offline
The footman's loop is called a "staple" in the Moss catalog ( 409-075 ) and the rubber block is called a "stop - seat back"
( 282-350 ).
Bob
( 282-350 ).
Bob