• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Easiest Way to Remove/Replace Rear Axle Seals/Etc.?

Share this page

AngliaGT

AngliaGT

Great Pumpkin
Silver
Country flag
Online
Went to replace the rear brakes/wheel cylinders on the '74 Midget.
Still can't get the "C" clips back on,that hold the cylinders in place
I noticed that tone of the seals on the rear axle was leaking.What's
the "real world" way to do them?
This is sure turning into an "As long as....." project.

- Doug
 
Doug the clips for the wheel cylinders are useless (assuming you bought new cylinders) Use the old ones or go to a hardware store and buy some circlips - You might need two to make up the thickness.
 
Gerard,

Thanks! - Just WHERE do you keep all those cars?

- Doug
 
If you use an old brake drum and a little piece of flat iron you can use the wheel nuts to pull the hub.

Kurt.
 
AngliaGT said:
Gerard,

Thanks! - Just WHERE do you keep all those cars?

- Doug
Click to expand...


It IS a problem! I can get 6 small cars in my garage, but currently have only 4 (...and a half--- sorta... pickup bed for the Morris pickup is off and occupying a space where I could normally have another car.) I have 4 other garage spaces I have to borrow or rent. One lives under a car cover... :(
 
Gerard said:
It IS a problem! I can get 6 small cars in my garage, but currently have only 4 (...and a half--- sorta... pickup bed for the Morris pickup is off and occupying a space where I could normally have another car.) I have 4 other garage spaces I have to borrow or rent. One lives under a car cover... :(
Click to expand...

Out of the goodness of my heart, I am happy to offer my driveway for the pickup. No, no need to thank me, that's just the kind of guy I am. Just leave the Morris and the keys and I will make sure it is safe. :grin: (and now back to brakes)
 
JPSmit said:
Out of the goodness of my heart, I am happy to offer my driveway for the pickup. No, no need to thank me, that's just the kind of guy I am. Just leave the Morris and the keys and I will make sure it is safe. :grin: (and now back to brakes)
Click to expand...


Well, not ready for the driveway yet...

attachment.php
 

Attachments

  • DSCF7122sml.jpg
    DSCF7122sml.jpg
    57.6 KB · Views: 150
well then man - get on it!:grin:
 
Back
Top