• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Denis Welch cooling fan arrived today

Share this page

H

hottvr

Jedi Warrior
Offline
There has been some interest in the specs of the spacer that comes with the fan. It is 2.881mm or .1134 inches wide and 3 1/4 inches across. It is not attached to the fan and does not come with any mounting hardware.
 

Attachments

  • IMG_2035[1].jpg
    IMG_2035[1].jpg
    62.1 KB · Views: 190
hottvr said:
There has been some interest in the specs of the spacer that comes with the fan. It is 2.881mm or .1134 inches wide and 3 1/4 inches across. It is not attached to the fan and does not come with any mounting hardware.
Click to expand...

That is similar to the one I made and used with my Texas Cooler it keeps the fan from over flexing when mounted on front of the fan using the the fan's normal attacing bolts.
 
Back
Top