Online
A lot of work, but is starting to pay off. Had to replace some wood, did a lot of work on the rear quarters after removing them, including removing a lot of Bondo on the right rear quarter. I hate Bondo! Then leaded in some slight deformities. I couldn't believe that I remembered how to lead, but it came back in a short time. Put everything back together and re aligned everything and all fit perfect. Temporarily mounted the windscreen bracket before sending out for re chroming, just in case the holes had to be aligned, as I cut the scuttle weld on the left side to re position it where it should have been in the first place. It came out perfect! Here's a couple shots of the tub without the firewall in place, which is at the media blasters along with the fenders and some other bits. They won't be ready until the following week, so I'm at a slow down point. Get the firewall back and bolted up I can get the tub back on the chassis to align the doors. One of the worst things to do on these cars. Here's some pics. PJ
Some new wood,
Windscreen brackets for temp fit,
New leaded area replacing Bondo,
Some new wood,
Windscreen brackets for temp fit,
New leaded area replacing Bondo,