• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

First Gear Wear

Share this page

M

mylesw

Jedi Hopeful
Offline
Hello

I finally managed to get the bearing off the mainshaft using a press, and now I am looking at first gear and deciding whether to replace it. The box was dismantled in the first place because first gear was very noisy - the laygear was shot so I have replaced that, question is now should I replace first gear also as these gears are very expensive and my healey budget is shrinking... Please have a looks at the picture and let me know your thoughts...

Thanks

Myles
 

Attachments

  • DSC_0089.jpg
    DSC_0089.jpg
    55.1 KB · Views: 139
It's worn through the surface of the teeth, will sound like an old air raid siren, shes toast. Time for new one, especially with laygear being new. cheers
 
Genos2 said:
It's worn through the surface of the teeth, will sound like an old air raid siren, shes toast. Time for new one, especially with laygear being new. cheers
Click to expand...
Especially with the gearbox apart -- unless you enjoy taking the trans out and apart. On the other hand, if you're really out of money, just start up in 2nd gear.
 
Its history , how much is your time worth .....Do it right the first time and its done .
 
look at the picture and let me know your thoughts. IT is long gone must replace-:greedy_dollars:.
 
Back
Top