• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Distributor cap problems

Share this page

J

jcsb

Jedi Trainee
Offline
Does anyone know of a quality distributor cap for my 60 MK1 BN7? I bought a new one from Moss and cut my bumblebee wires to length. Then on the first one instead of punching through and making contact through the copper conductor, it pushed the brass seat on the inside of the cap out where the screw is. Tried a couple of times only to have the same thing happen. Taiwan cap.
John
 
I've seen Beck-Arnley caps on the famous auction site which, if they're truly NOS and not new cr_p should be of good quality. Try it. Near $50 though but beats walkin' home...
 
AH100M said:
I've seen Beck-Arnley caps on the famous auction site which, if they're truly NOS and not new cr_p should be of good quality. Try it. Near $50 though but beats walkin' home...
Click to expand...
I bought the Bremi NOS German made cap. We'll see. $49.95. Just for fun I tried another location and it did the same thing. Instead of cutting through the insulation it just pulled the brass post out. Arghh
John
 
You Might give EBay a try NOS dizzy caps show up there quite frequently
 
Back
Top