• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR5/TR250 TR250 Project

Share this page

K

kayo

Member
Offline
The car is being readied for the journey from CT. to NJ. It should arrive Thursday am.
 

Attachments

  • image.jpg
    image.jpg
    89.7 KB · Views: 171
  • image.jpg
    image.jpg
    88.7 KB · Views: 181
I hope there's a frame with engine, transmission, differential and suspension included! :smile:

Scott
 
The body is mounted on the rotisserie. I don't know why the picture is upside down. My apologies, I guess I was standing on my head when I took the pic?!?
 

Attachments

  • image.jpg
    image.jpg
    97.2 KB · Views: 130
Would love to have a truck show up at my house with a present like that. :smile:

Scott
 
I want to strip the chassis down to the bare frame, so it can go to media blasting etc. I am starting with the front suspension. I will wait for the TRF spring compressor I just ordered before taking the damper and spring off.
 
Oops, did not complete the photo attachment. Here it is:
 

Attachments

  • image.jpg
    image.jpg
    93.2 KB · Views: 115
I have disassembled the right front suspension. Can anyone tell me how to know if I need to replace the trunnions? I never drove or even had the opportunity to steer the car as it was a separate chassis and body when I got it. When I took the right side apart, it did not feel loose or floppy. I do plan to change out the track rod ends and the ball joints. Should trunnions be automatically discarded like the tie-rods and ball joints?

thanks
 
Kevin-

My opinion, but no you don't need to replace if they aren't loose fitting. Really you don't have to change out the balljoints or tie rods either if they are still tight but I almost alway do as decent parts still seem to be available at reasonable cost.

Randy
 
Kayo, I would just replace the trunnion bushings for the moment and check for looseness when it's apart. Up and down is the way to get a feel for replacement, if it's loose enough to bang or click, replace. Also unscrew them counting the turns and add 140 weight gear oil for about 1/2 inch and screw back on, have a pan ready for the overflow.

Wayne
 
Back
Top