• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Horn Button installation

Share this page

Zitch

Zitch

Jedi Hopeful
Country flag
Offline
This maybe a novice question but..... Is there a trick to getting the horn button pressed into the clip of a standard steering wheel?

on a 63 tr4

I can get the horn button into two of the clips but not the third, should I bend the clip?

Number 2 into number 5?

TRI-027.gif
 
Nope you shouldn't bend it, but it can be a little tight. I think I've used a small screwdriver or needle or something to persuade the clip to start - but it will all go together - don't bend it.
 
Just put one on mine with no problem. Can't remember, but believe
if you look on the back it can only be put on certain way.
Harry
 
push straight down or start with the 2 top prongs and try to get the third prong of the clip in there?
 
Zitch said:
push straight down or start with the 2 top prongs and try to get the third prong of the clip in there?
Click to expand...

I think I had success getting the 2 started first, then working the third one in place.
 
Back
Top