• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A TR3 kick panel captive nuts?

Share this page

AHS

AHS

Senior Member
Country flag
Offline
Today I've been working on repairs to the left side floor and the outer kick panel on the left side needed some metal replaced too. This piece has a recess that includes 2 captive nuts in cages spaced vertically about 4-5/16" apart. I had to replace the metal where the lower one was and I'd like to use the actual item that bolts on here to reposition the captive nut - the trouble is I got this car in pieces and I don't know what actually bolts on here! Any help would be appreciated. Thanks, Andy
 
Maybe where the headlight dimmer switch bracket bolts to the body? A photo would be a big help.

 
You're right again Randall. I don't know why I didn't think of that. I'll use the bracket as a drill guide and maybe angle it a little to match my foot. Is the panel typically bare like that, with no carpet or trim panel? Thanks,Andy
 
AHS said:
Is the panel typically bare like that, with no carpet or trim panel?
Click to expand...
No, that photo just shows the way TS13571L came to me. The orange outdoor carpet isn't correct either !
 
Back
Top