• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

door trim/seals info

Share this page

CanberraBJ8

CanberraBJ8

Jedi Trainee
Offline
Is there a document or description somewhere that goes through the correct seals, and fittings for BJ8 door/weather seals etc.

In looking for sources of furflex I have started to notice various clips etc that I don't recognise on my car... etc

eg .
image.tiff
'Shut Pillar seal set'...

Now these may be on the car - but I don't recognise them from the photo...
And it seemed from one catalog I was looking through that the type of weather seal varied from above and below the window glass?
 
I've not had good luck with their windlace__their clips were made of aluminum, instead of spring-steel.

You can imagine the results: fit the windlace, close the door/open the door, windlace falls on the floor...

This was some years ago, and that may no longer be the case, but I've learned my lesson.
 
A better product then furflex is Bristleflex.
Furflex does not want to clip on and stay on.
The Bristleflex presses on and stays firmly in place. The rubber is much softer too.
Bristleflex comes in an assortment of colors too. I think Moss only sells black, but you can buy the colored ones directly from the sorce.

https://www.macgregorukcarparts.com/
 
tahoe healey said:
Actually, Moss has it on back order 4 or 5 months now with no expected date. The mfg does not return calls or emails.
TH
Click to expand...

Moss only sells the black/grey.
I've purchased blue from mfg three times and he always been very helpful and stands behind his product.
 
A better product then furflex is Bristleflex.
Furflex does not want to clip on and stay on.

Yep:
You cant even glue furflex on.
Go direct to Martin Maggregor in canada for the Bristlflex
There are two metal clips that secure the seal to the top of the rear inside upholstery panels.
A factory manual will show you how to do it
 
Back
Top