• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Toggle Switch Needed

Share this page

Michael Oritt

Michael Oritt

Yoda
Silver
Country flag
Offline
Hi all--

I am looking for a toggle switch with "On-On-Momentary On" configuration.
Any suggestions or resources will be appreciated.
 
Michael Oritt said:
Hi all--

I am looking for a toggle switch with "On-On-Momentary On" configuration.
Any suggestions or resources will be appreciated.
Click to expand...
Digikey has been a good supplier for me. I have a switch that is on-off-momentary on that I use for the headlights, but uses a relay to translate into hi-low-flash.
 
John Turney said:
Digikey has been a good supplier for me. I have a switch that is on-off-momentary on that I use for the headlights, but uses a relay to translate into hi-low-flash.
Click to expand...
Hi John--

Thanks and I will check with them. As you may have guessed I want to use this switch to move the headlight dimmer switch onto the instrument panel. I would like to incorporate a momentary-on circuit to flash headlight high beams at oncoming cars as it seems to be an ever-increasing phenomenon for people to use high beams regardless of oncoming traffic. I already have separate relays for both circuits so the switch will not be carrying high current.
 
It seems to me that much of what we think are people driving with high beams on, are sometimes just high riding SUVs and pick up trucks with factory LED headlights set on low beam which blind the oncoming cars that sit lower to the ground.

Try flashing your brights to them and you may soon find out, as I have on more than one occasion.
 
John--

Thanks again--Digikey had them but had a minimum order of five units. I ultimately found one at Grainger.
 
Michael Oritt said:
Hi John--

Thanks and I will check with them. As you may have guessed I want to use this switch to move the headlight dimmer switch onto the instrument panel. I would like to incorporate a momentary-on circuit to flash headlight high beams at oncoming cars as it seems to be an ever-increasing phenomenon for people to use high beams regardless of oncoming traffic. I already have separate relays for both circuits so the switch will not be carrying high current.
Click to expand...
Same as I have. The way mine is set up is that the center position (off) allows the main head/side switch to provide the power to the low beams. The on position allows power to the high beam relay and the driving lights relay. The momentary position allows the same current flow to the high beams and driving lights, but with a spring in the switch to return to "off" when released. There is a separate on/off pull switch for the driving lights.
 
Scargo said:
It seems to me that much of what we think are people driving with high beams on, are sometimes just high riding SUVs and pick up trucks with factory LED headlights set on low beam which blind the oncoming cars that sit lower to the ground.

Try flashing your brights to them and you may soon find out, as I have on more than one occasion.
Click to expand...
Don't I know!
 
Back
Top