• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

SU HD8 Carb Choke Lever

Burkee

Senior Member
Country flag
Offline
Recently had carbs rebuilt and my car is starting hard.

Do both front and rear carburetor choke levers have to be pulled up equally when choke is pulled?

Front carb pulls up all the way, but the rear carb does not.
 
Recently had carbs rebuilt and my car is starting hard.

Do both front and rear carburetor choke levers have to be pulled up equally when choke is pulled?

Front carb pulls up all the way, but the rear carb does not.
The carbs having been rebuilt, the arms (and jets) should be moving freely in which case you should adjust the rear cable to take up any slack. The arms returning equally (and thoroughly) is just as important. I use the pen spring method (below) but I'm sure other styles would work too. The picture in the link shows where the cable gets adjusted as well.

 
The carbs having been rebuilt, the arms (and jets) should be moving freely in which case you should adjust the rear cable to take up any slack. The arms returning equally (and thoroughly) is just as important. I use the pen spring method (below) but I'm sure other styles would work too. The picture in the link shows where the cable gets adjusted as well.

Car always started hard. Had carbs rebuilt and ran very lean, ran better with dirty carbs. Adjusted rear jet arm so that it moved up higher when choke cable pulled. Started immediately, what a difference. Springs are attached and pull the arms back. I like the look of the pen method. Thanks, Ed
 
Back
Top