• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Short legs!

Share this page

I’m not familiar with the TD - and it is not clear to me how the Moss extenders work. Do they push the upper pivot point forward, pushing the pedal below backward?

(I’m not surprised they are no longer for sale. Lawsuits and critical safety components (brakes), don’t play nice together… sad.)

Alternatively, could you drill holes in the pedals and bolt (securely) hardwood blocks on?
 
The clutch and brake pedals are already set up for the extenders, but the gas pedal is not. As in a previous post, these are a short pair of extenders, they made longer ones like those in the picture. I think they came in three lengths, not sure. My TF has a pair of short ones on it. PJ

pedal extenders.JPG
 
Rhodyspit75 said:
I can give you dimensions. I have two short ones for my car
Click to expand...

Thanks. I think the bolt hole diameters are the most important, plus the Width and Length and Thickness of the bolt hole stubs. Total length of the unit probably rests on how much the new owner actually needs. (I'm referring to the Moss photo)

Still need to figure out how to "extend" the throttle pedal. Seems a wooden, plastic, or metal block, with a curved rear surface, fastened to the original pedal with bolts on left and right, would do the trick.
 
When I was a kid and was driving the hay truck for my dad and grandad, my dad tied wooden blocks to the pedals so I could reach.
 
Walt - that was done on many farms and off-road vehicles, but I'm afraid the new owner of my '53 TD wouldn't want to try driving today's roads using wooden blocks tied on the pedals!
 
waltesefalcon said:
When I was a kid and was driving the hay truck for my dad and grandad, my dad tied wooden blocks to the pedals so I could reach.
Click to expand...
Anything to get some work out of the kids! 🤣
 
PAUL161 said:
Anything to get some work out of the kids! 🤣
Click to expand...
I was about eight. I drove, my mom was on the back stacking bales, and my dad and grandad walked alongside bucking bales up to her.
 
Joy Rainey and her dad managed to be very successful racers with adapted cars.
i recall seeing them in paddock at Silverstone very short and very talented and very nice people.
www.aronline.co.uk

The Great Motor Women : Part Four – Joy Rainey - AROnline

Following on from his excellent – and ongoing – series The Great Motor Men, AROnline Contributor Martyn Kelham continues on his tour of the great motoring
www.aronline.co.uk www.aronline.co.uk
 
Being vertically challenged myself, I have bolted blocks to the clutch pedal with good success -- once on a racecar and once on a currently-owned LBC.

As long as the block is solidly and securely fastened (as on the Amazon brake pedal extension above) I would not hesitate to use it in traffic, even on the throttle. If the block is "tied" to the pedal, I'm out.

And don't even think of tying them to your feet, a la Short Round in Temple of Doom:
1707769103205.png
 
Back
Top