Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
My plexiglass window jumped off my workbench and broke and I need another one. Anybody have a good USA source or a overseas reliable source?
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
BJ8 Factory Hardtop Rear Window
- Thread starter Patrick67BJ8
- Start date
Share this page
Healey Nut
Luke Skywalker
Offline
Mine for my BT7 rally car project came from Cape in the UK they were the least expensive for the window . Shipping is pricey .
It required minimal trimming to get it to fit .
It required minimal trimming to get it to fit .
dougie
Luke Skywalker
Offline
Ditto ...
Attachments
OP
Offline
Thank you. They are the best price. I just ordered.
OP
Offline
Thank you!
Healey Nut
Luke Skywalker
Offline
FYI . Mine arrived without protective plastic film on it . It was fine no scratches etc . I just covered it with painters tape both side while I fitted and trimmed and fitted etc then peeled it all off .
OP
Offline
Thanks for the heads up.