• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR4/4A TR4A Radiator Duct Question

Share this page

Stinger

Stinger

Jedi Hopeful
Country flag
Offline
Are the TR4A radiator ducts suppose to have a nice pebble grain black finish on the inside and a flat gray plain cardboard finish on the outside? Is this how the originals were made? Thanks
 
My experience is with a TR4 but FWIW -- the exterior was a flat gray, I would call it almost a dark grey. I honestly don't recall what the inside was like.

I have seen some variations in what is supplied as repros but the one I got from Moss was very close to the shabby original it replaced. My only objection to their part was that they slapped a sticky bar-code label right on the top -- very tricky to remove and not damage the soft fiberboard.

<span style="font-style: italic">Okay, I peeked inside the one I have on the TR4 -- hard to see of course, but the inside lookd just like the outside on the Moss version. A pebble-grain inside seems odd yet sounds familiar (like I have seen that part on someone elses TR). Perhaps a finish on the inside adds water resistance.</span>
 
I am finally getting around to placing a new Moss radiator duct on my car. Its the fiberboard type with a grain vinyl underside. The problem is the from edge of the duct is straight across yet the valence it mates to has a slight "v" shape. So, the darn thing doesnt fit unless I do some srious trimming/bending to the fiberboard. Any suggestions?
 

Attachments

  • 20220331_163909[1].jpg
    20220331_163909[1].jpg
    1.7 MB · Views: 88
Bronco said:
I am finally getting around to placing a new Moss radiator duct on my car. Its the fiberboard type with a grain vinyl underside. The problem is the from edge of the duct is straight across yet the valence it mates to has a slight "v" shape. So, the darn thing doesnt fit unless I do some srious trimming/bending to the fiberboard. Any suggestions?
Click to expand...
Ignore the difference.
Charley
 
This does not help anyone above but for anyone looking at a duct I got the metal one from Moss and it fit perfectly and has a black crinkle finish. Very pleased. Obviously not for a purist but it looks good. Bruce
 
bammons said:
This does not help anyone above but for anyone looking at a duct I got the metal one from Moss and it fit perfectly and has a black crinkle finish. Very pleased. Obviously not for a purist but it looks good. Bruce
Click to expand...
Okay, I will tip my friend when we start working TR4A this weekend. The rack, hard tops, and jeep accessories for his Wrangler arrived so we have to finish that first.
 
Bronco said:
I am finally getting around to placing a new Moss radiator duct on my car. Its the fiberboard type with a grain vinyl underside. The problem is the from edge of the duct is straight across yet the valence it mates to has a slight "v" shape. So, the darn thing doesnt fit unless I do some srious trimming/bending to the fiberboard. Any suggestions?
Click to expand...

How mine fit (came from Moss, though it is a TR4):

Shroud3.JPG


For the curious... that business on the top are the headlamp relays.
 
Back
Top