• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

bugeye tail lights

Share this page

Black is always ground. Red is tail light. Tracer wire is brake light.
 
Thank you for your reply. My problem is I don't know which of those terminals is which. Two at the bases of the bulbs and one sanding apart.
 
rossco said:
Thank you for your reply. My problem is I don't know which of those terminals is which. Two at the bases of the bulbs and one sanding apart.
Click to expand...
That is standing apart. As you know it's a two filament bulb so which wire serves which side of the bulb?
 
I don't have a bugeye so that I don't know. Someone else will have to come along with that info.
 
Thanks for all your help so far, Bayless. I did run jumpers from each terminal to a test battery. I hooked up the ground to the frame of the light then I jumped from terminal to terminal with the other two wires and found the sides that were dimmest and brightest. I assume the bright is the brake light side. Would that be the tracer wire? Green with purple that goes to the stop light switch.
 
Right. Brake light brighter and gets G/P wire. Tail light re wire.
 
Back
Top