• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

cool air pull knob nut

Share this page

tahoe healey

tahoe healey

Yoda
Country flag
Offline
I am in need of a replacement for the chrome round nut (with slots) that fits the cool air knob. The one that came with the car 18 years ago is too small and fits the switches for OD, lights and wipers. It allows movement and wobble. Moss and VB do not list it. Anyone have a spare or know of a source?
 
BCS was closed for vacation until Tuesday. I will try them next week. I haven't dealt with Healey Surgeons in many years and forgot about them. Thanks.
 
s-l1600.jpg
Hi
Sorry for hijacking this post but I've just found these brilliant 3D printed (?) Healey "pull" knobs on UK ebay (https://www.ebay.co.uk/itm/AUSTIN-H...436155&hash=item443ea69db5:g:D-oAAOxyRNJSjlzH). these are so much superior to those sold by the big supplies in the UK, who sell plastic knobs with transfer writing which easily rubs off. The 3D printed knobs have recessed letters looks very original.
Phil
 
fishyboy said:
View attachment 59144
Hi
Sorry for hijacking this post but I've just found these brilliant 3D printed (?) Healey "pull" knobs on UK ebay (https://www.ebay.co.uk/itm/AUSTIN-H...436155&hash=item443ea69db5:g:D-oAAOxyRNJSjlzH). these are so much superior to those sold by the big supplies in the UK, who sell plastic knobs with transfer writing which easily rubs off. The 3D printed knobs have recessed letters looks very original.
Phil
Click to expand...

Thanks for the tip, Phil. I ordered this as well as the "Push" heater knob.
 
Hi Steve
I spoke to the guy who runs the company - presumeably Ashley Hinton. They have been making parts for 44 years and yet I've never come across them in 30 years of Healey ownership. I have allways reveretd the AH Spares and AheadforHealey here in the UK.

They also sell the Side/Lights knob and the Wiper knob. He also makes lots of the Smith Heater parts (check out the blower) and lots of panels etc. His line runs to just over 6000 parts (various British classics). For the knobs he bought the injection molds from the original manufacturer 20 old years ago and once the knobs have been produced sends them out to an engraver who puts on the words. The engravers has been doing instrument engraving for over 40 years.

Really great to meet someone dedicated to producing quality parts in view of all the junk that is on the market!

Check out the facebook page which shows different parts been made (https://www.facebook.com/Ashley-Hinton-245648178847505/).
 
I guess I'm a little disappointed. Although it great that someone is making a quality reproduction of these knobs, I was really excited that they may have been 3D printed. I know nothing about 3D printing but it can do amazing things.
 
Tahoe Healey,
Did you find the bezel nut? I may have one but I will have to do some digging. Let me know.
Lin
 
Can someone confirm that the original knobs had the lettering engraved vs. printed on the surface. I don't have my original knobs anymore but I thought the lettering wore off over time. If they had been engraved, I'm pretty sure I would have been tempted to try to restore them.
 
Well I have an old unrestored knob still on my BJ7 that is yet to be restored and it is smooth with no signs of lettering so I would assume they were originally printed on and wore off as this old knob has.
 
tahoe healey said:
I am in need of a replacement for the chrome round nut (with slots) that fits the cool air knob. The one that came with the car 18 years ago is too small and fits the switches for OD, lights and wipers. It allows movement and wobble. Moss and VB do not list it. Anyone have a spare or know of a source?
Click to expand...

Maybe Ashley Hinton would sell the bezel nut separately.
 
After thinking more on the subject, my original headlight/sidelight, wiper knobs and Starter button are engraved. I know because I started to restore them by painting them black and them added white paint to the engraved areas. The only one that looked acceptable was the starter button which I installed. I bought replacements for the two other knobs. The new ones are engraved also.
But I still think the original heater knobs were printed on the surface.
 
Back
Top