Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Northcoaster
Freshman Member
Offline
Hello,
I was the proud owner of a 63 TR4 for 33 years, but around 8 years ago I got bit by the track bug and decided to sell it to buy something a little more contemporary (miata). While the car is long gone (to a very good home), I still have a lot of Triumph stuff to get rid of. I thought I would give you guys first shot at everything.
For starters, I have most of a TR4a engine that I bought for its cylinder head. My original head which is for sale, had been milled enough so that when Sunoco stopped selling 260 gas, it became a problem. The cylinder head has hardened seats, seat liners, and a mild porting job. I will be happy to mike the head thickness for anyone interested. No idea of octane requirements for this head. Can't seem to be able to come up with a photo right now, but if you're interested I'll take as many as you like. Only looking to get $75+ shipping for it. If you are looking for any other engine components (minus manifolds and carbs), hit me up. I'm not going to list them all now. Moving forward:
A TR4a valve cover in very good condition. $50+shipping
Isky pushrods. $35+ shipping
New shock absorber links. $35 inc shipping
Hood badge. $35 inc shipping
Addco rear swaybar with mounting hardware and instructions. $70+shipping
If you didn't see my introduction letter, here's my ride. The kid in the photo is my nephew, and almost 40 now!
Best Regards, Richard Fellows
585-727-8310
I was the proud owner of a 63 TR4 for 33 years, but around 8 years ago I got bit by the track bug and decided to sell it to buy something a little more contemporary (miata). While the car is long gone (to a very good home), I still have a lot of Triumph stuff to get rid of. I thought I would give you guys first shot at everything.
For starters, I have most of a TR4a engine that I bought for its cylinder head. My original head which is for sale, had been milled enough so that when Sunoco stopped selling 260 gas, it became a problem. The cylinder head has hardened seats, seat liners, and a mild porting job. I will be happy to mike the head thickness for anyone interested. No idea of octane requirements for this head. Can't seem to be able to come up with a photo right now, but if you're interested I'll take as many as you like. Only looking to get $75+ shipping for it. If you are looking for any other engine components (minus manifolds and carbs), hit me up. I'm not going to list them all now. Moving forward:
A TR4a valve cover in very good condition. $50+shipping
Isky pushrods. $35+ shipping
New shock absorber links. $35 inc shipping
Hood badge. $35 inc shipping
Addco rear swaybar with mounting hardware and instructions. $70+shipping
If you didn't see my introduction letter, here's my ride. The kid in the photo is my nephew, and almost 40 now!
Best Regards, Richard Fellows
585-727-8310
