• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Anybody have...?

Share this page

Gerard

Gerard

Luke Skywalker
Country flag
Offline
I'm trying to help a friend get his '61 Sprite switched over to disc brakes and he needs a set is disc wheel hubs. If you have a set you don't wish to piece out, that's an option too, but otherwise I've located everything but the hubs.

Thanks
 
Gerard said:
I'm trying to help a friend get his '61 Sprite switched over to disc brakes and he needs a set is disc wheel hubs. If you have a set you don't wish to piece out, that's an option too, but otherwise I've located everything but the hubs.

Thanks
Click to expand...

Are these just the plain old front hubs? Like from my Midget? - I am certain I have a pair - yours for shipping but from Canada.
 
Hi JP, There are wire wheel hubs and disc wheel hubs. If these are disc wheel/steel wheel hubs for disc brakes and not splined ones, that's what I'm looking to find. If so, I'm interested, but let me know what shipping would be to BATTLE GROUND, WASHINGTON 98604

Do you have "Flat Rate" available in Canadian Post?

Looks like this...

DiscBrakeHub2.jpg

JPSmit said:
Are these just the plain old front hubs? Like from my Midget? - I am certain I have a pair - yours for shipping but from Canada.
Click to expand...
 
I replied to your PM - I was thinking rotor not hub - sorry, that I don't have.
 
I've got one set of disc's and a pile of wire's. When I replied to you earlier for some reason I was thinking you were looking for the original drum brake set up for a BE. Got one of them too. Unfortunately I'm not parting with the disc set up since my driver has worn wire hubs and poor wheels. Before I would replace with wires I would go disc's on that car. I'll double check the bone pile though to see if I have another set. They're out there, Gerard. Good luck.

Kurt
 
Thanks, Kurt. Even just hubs would be good.
 
Struck out, found more BE hubs and wire hubs but no disc's. Most of my stuff was given to me by the go to guy in the club who owned a storage unit and has been pretty well picked of the best bones already. Anyone need cast iron exhaust manifolds for A series? How about another couple of BE drum front hub sets or worn wire wheel hubs? Smooth case tranny's??

Kurt.
 
Back
Top