Hey there Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Offline
I am not a fan of a lot of electrical luxuries in my cars. My dad had a maxim that the more bells and whistles a car had the more things there were to go wrong.
For the past year I have been struggling with old electric window regulators in the Miata. I initially just took them apart, cleaned them, and greased them good. That worked for a month or so. The tiny little motors had started to struggle to get the windows up, so I bought a pair of after market regulators. Those worked for a few months, but they were on the cheap side and started struggling themselves. I decided that it was time for an upgrade.
I bought a pair of manual regulators on Ebay, one from a 91 and one from a 94 Miata, both were in good condition. After a little cleaning and lubrication they went in, and now I have beautiful manual windows.
While doing this, I also decided to replace the old cardboard door panels, and bought a pair of ABS ones from Hall Racing. I had to enlarge the speaker holes to accommodate my Rockford Fosgate 6" speakers, but that was easy enough. I just measured out how much larger the hole needed to be, scored the abs with a razor blade, then used a coping saw to cut it into approximately 1" sections that I snapped off along the scored line. I did have to put the speaker grills on the belt sander and take about 3/8" off of them so that the window cranks would clear them. I also took a little bit of material off the very end of the window cranks, and have about .040" clearance between the grill and the crank handle. I'm pretty pleased, with how this little Sunday project turned out. As an added bonus deleting the arm rest produced a bit more knee room for me.
For the past year I have been struggling with old electric window regulators in the Miata. I initially just took them apart, cleaned them, and greased them good. That worked for a month or so. The tiny little motors had started to struggle to get the windows up, so I bought a pair of after market regulators. Those worked for a few months, but they were on the cheap side and started struggling themselves. I decided that it was time for an upgrade.
I bought a pair of manual regulators on Ebay, one from a 91 and one from a 94 Miata, both were in good condition. After a little cleaning and lubrication they went in, and now I have beautiful manual windows.
While doing this, I also decided to replace the old cardboard door panels, and bought a pair of ABS ones from Hall Racing. I had to enlarge the speaker holes to accommodate my Rockford Fosgate 6" speakers, but that was easy enough. I just measured out how much larger the hole needed to be, scored the abs with a razor blade, then used a coping saw to cut it into approximately 1" sections that I snapped off along the scored line. I did have to put the speaker grills on the belt sander and take about 3/8" off of them so that the window cranks would clear them. I also took a little bit of material off the very end of the window cranks, and have about .040" clearance between the grill and the crank handle. I'm pretty pleased, with how this little Sunday project turned out. As an added bonus deleting the arm rest produced a bit more knee room for me.
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.