Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
G
Guest
Guest
Guest
Offline
In a previous post, I was lamenting that I could not find the wire for my emergency brake failure light. Weellll, I called the manufacturer, British Wiring (bought the harness from The Roadster Factory five years ago)and described my dilemma. Now, the guys that own British Wiring are really, really nice, Ed and his wife Lindsey. He disputed my premise that maybe there was a mistake made in the manufacture of this harness (I think they are made in England). So he pulled a new one off the shelf and lo and behold, the darn wire is missing indeed! I was right! So for those of you that have a brake failure warning light in your dash, there should be a white and black/purple wire to the holder and goes from the ignition to the PDWA switch. Not a white (hot) and black (ground) wire that would make it burn all the time. This would be for 73-74, CF 1-10,000?
All I have to do is run a wire from the PDWA to this light and replace the ground wire. Geez, I never had a brake warning light, and never really cared. That's the scary part.
Bill
All I have to do is run a wire from the PDWA to this light and replace the ground wire. Geez, I never had a brake warning light, and never really cared. That's the scary part.
Bill
