Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I am trying to find a replacement hose for my XK120. The car has been converted to disc brakes in the front and therefore does not use the conventional flexable front brake hose. The specifications of the hose I need are:
Caliper-end fitting = 3/8" - 24 thread and 3/4" long male flare fitting.
Chassis-end fitting = outside demension of fitting is 5/8" and is threaded. The fitting is also threaded on the inside to accept a 7/16" - 20 thread flare fitting which is everted (convex) inside the hose-fitting end to accept a double-flare end hard line.
Any leads or help in finding the hose are greatly appreciated. I have tried XK's, Basset and Guy Broad already.
GregJ
Caliper-end fitting = 3/8" - 24 thread and 3/4" long male flare fitting.
Chassis-end fitting = outside demension of fitting is 5/8" and is threaded. The fitting is also threaded on the inside to accept a 7/16" - 20 thread flare fitting which is everted (convex) inside the hose-fitting end to accept a double-flare end hard line.
Any leads or help in finding the hose are greatly appreciated. I have tried XK's, Basset and Guy Broad already.
GregJ