• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

xjs v12 tire wear

Share this page

D

dave01

Member
Offline
When I first bought this car there was wear on the inside of both front tyres for about 30mm of the width, I had the tracking adjusted and although the tyres will never recover they still are wearing on the inside .The tread depth on the rest of the tyres is about 5mm ,the worn part is boardering on 1mm, any help with this? /ubbthreads/images/graemlins/hammer.gif
 
First, check all the suspension components for wear. Upper ball joints, and/or upper control arm bushings can cause this. If all is well, have the car aligned using the factory "mid laden" ride height tools. Using the tools is absolutely required to get the settings right. Do not let anybody try to tell you otherwise. If you align the car WITH the tools, and remove the tools and measure again, the settings will have changed. The settings are correct ONLY with the tools in place. The tools are easily made, and directions and specs are to be found in the factory service manuals.
 
Back
Top