• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

XJS Fuel Injector, Air Temp Sensor, Water Temp Sensor Harness Connector Replacement

Share this page

M

Michael J.

Jedi Warrior
Offline
At a NAPA Parts store the part number 2-17427 "Wired Housing" connectors that fit the injector electrical connection and the coolant and air temp sensors can still be purchased. List is $11.58 ea and Napa sells them for $8.49 each. So anyone needing to replace broken connectors, here is a cost effective way to repair the harness. Each comes with 3" pigtail wires. The boots are not available. I'm going to try heat scrink tubing.

Keep your spring clips! They are available from NAPA under p/n 2-17417, but Napa charges $1.49 net and $2.02 EACH!!!
 
Back
Top