• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

XJ6 Mk1 clutch slave question

Share this page

S

Sorta

Freshman Member
Offline
Trying to pair a XJ6 Mk1 clutch slave cylinder with an MGB (1970) clutch master cylinder. Longer story, but if you can tell me the thread on the bleed nipple on the slave cylinder that would help immensely. Then, any recommended flex hose suppliers that can make up custom ends.
cheers, Dave
 
Back
Top