• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB Wrench for MGB diff fill plug

Share this page

drooartz

drooartz

Moderator
Staff member
Gold
Country flag
Offline
Need to check the diff, and don't have anything that will work for the diff fill plug (it's bigger than the one on the Sprite).

Cut down a 1/2" extension? Other ideas?
 
Drew for most of us, it's cheap 1/2" extension with a bit of grinding done to it to get that perfect fit.
 
Thanks, Hap. I'll pick one up on the way home today.

Hope your racing went well this past weekend.
 
Even a 3/8" extension works although it is a sloppy fit.
 
I ground down a 1/2" extension the first time I did it...works great !
 
Thanks all for the tips. A 1/2" extension and a few minutes with the grinder did the trick. :thumbsup:
 
Back
Top