• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Whitworth Strikes again

Share this page

DNK

DNK

Great Pumpkin
Country flag
Offline
So I'm trying to plum my espresso machine into my water supply so I don't have to fill the reservoir every 2 days and I can filter the water better. Turns out the thread on the machine is G1/8 which I find out is Whitworth thread (BSPP).
Trying to find an adapter to hook up to the standard 3/8" compression fitting on the water supply is a bugger (English slang).
 
Randall, saw those
My existing is male
I would prefer not to have a BSP to NPT to compression .
That's a lot of adapters
 
I've heard of "one, two, many"; but not "one, many". Anyway, sorry I couldn't help.
 
Back
Top