-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR6 Which clutch master cylinder for a 71 TR6?
- Thread starter Michael
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
Either one will work. The smaller bore gives a softer clutch pedal, but takes more pedal travel. For some folks, depending on wear and such, there may not be enough travel. Fitting the larger MC is one work around.
Your car would probably have had the .70" originally, but 69-70 (and earlier) used the .75"
Your car would probably have had the .70" originally, but 69-70 (and earlier) used the .75"
TR3 Driver, I had a clutch master cylinder issue this weekend and 'almost' had to get towed home, the master was sticking at half return and wasn't providing enough fluid do operate the clutch.... Some air pressure in the vent hole and hammer tapping and "click' it returned home... and I got home.... I believe I rebuilt it years ago... but now not trusting it.... and will probably replace it.
I knew about the .70 vs .75 choice, it is interesting.... just wondering if you have any more insight on the choice, pros or cons?
Currently my 76 TR6 has a .70. it has worked in the past, but yes seems to be 'just enough'. My tendency would be to keep it stock...
Are there any risks with the .75? could stroking the slave cylinder farther damage anything?
I have read somewhere that the pedal force will increase about 12%.... ?
any insight would be appreciated.
S
I knew about the .70 vs .75 choice, it is interesting.... just wondering if you have any more insight on the choice, pros or cons?
Currently my 76 TR6 has a .70. it has worked in the past, but yes seems to be 'just enough'. My tendency would be to keep it stock...
Are there any risks with the .75? could stroking the slave cylinder farther damage anything?
I have read somewhere that the pedal force will increase about 12%.... ?
any insight would be appreciated.
S
D
Deleted member 12064
Guest
Guest
Offline
Moss and TRF list the .70 as original for 1970-76.
Offline
On a 6 the OE rod is non adjustable. Since 52 years have passed, I suggest retro fitting the earlier rod to pickup some
adjustment to make it sweeter. A 6 can also benefit from a brace as the earlier cars had. Some of the clutches for the
2.5L are way too stiff and flex the bracket.
Mad dog
adjustment to make it sweeter. A 6 can also benefit from a brace as the earlier cars had. Some of the clutches for the
2.5L are way too stiff and flex the bracket.
Mad dog