• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Wha' Hoppened?

Share this page

Mickey Richaud

Mickey Richaud

Moderator
Staff member
Gold
Online
OK, so yesterday I'm driving down the road, enjoying the day, and all of a sudden the TR3 stops dead. This has happened before, and turns out it's due to a loose connection at the ignition switch. Jiggle the wires and there's power again.

Don't want this happening at an unopportune moment, so any thoughts on keeping those pesky screw connections intact?

Mickey
 
loc tight

Cheers,
thirsty.gif
driving.gif

Walter
 
Thought about Loctite, but always wondered about its conductivity. Have you used it on connections, Walter?

Mickey
 
<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by Mickey Richaud:
Thought about Loctite, but always wondered about its conductivity. Have you used it on connections, Walter?

Mickey<hr></blockquote>

Just put a minimal amount on the threads. The head of the screw will conduct.
 
The pre-60000 (?) TR3 connectors that clamp onto bare wire can work loose once the wire strands have been mashed awhile. I have a similar problem but it seems to be internal to the switch -- I have learned to reach back there and fiddle with the body of the switch the instant the ignition light comes on... not ideal but happens seldom and I can recover before I have lost more than 2 or 3 mph.
 
Mickey,

Steve, and Bruce are right. The threadlocker would probably be easier to deal with when you wanted to unscrew the connections and as long as you just put a little bit on the threads you'll be fine.

Cheers,
thirsty.gif
driving.gif

Walter

P.S. Sorry I didn't go into a half way decent explanation when I first suggested it.
 
How about a lock washer? or if using loctite use the following:

Medium Screw Thread Threadlocker, Size 10 Milliliters, Color Blue, Removable for Fasteners 1/4 to 3/4 Inch LOCTITE 24221
 
Aloha Mickey,

You probably won't ever need to take your glasses apart, but you may need to undo the connections in the car at sometime. I also endorse the loctite.

Safety Fast,
Dave
 
For my 2 cents I prefer to soldier the wires together (or the single end) to solidify the conection. Often the wires fray and splinter off over time if you dont. Then almost any locking compound will work to keep the screw tight. If you do this once you will never be sorry.
Good luck!!
MD(mad dog)
 
OK, I'm sold - Loctite it is. Will try it and see how it does.

Interestingly, I'm having the same problem with my glasses and those LBS's (little bitty screws). Super Glue fixes them, though. Hmmm.......
 
MD -

Yeah, I thought about soldering the ends - will also do that. Thanks!

Mickey
 
Mickey,

You could probably use loctight on your glasses too.
thumbsup.gif


Cheers,
thirsty.gif
driving.gif

Walter
 
Know it's late, but just popped in, gotta go with MD on this one.
Just did it in the driveway last week.

Winston 67TR4A IRS
 
Back
Top