• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Off Topic welding fumes

Share this page

deuce

deuce

Senior Member
Country flag
Offline
Hi..Off topic maybe, but does anyone out there have any experience/recommendation with/for welding fume extraction.$1000-$1500 range. Thanks
 
tomshobby said:
I worked in a large fabrication shop. When the welders worked in confined areas they wore hoods that had fresh air piped in. Since I ran the machine shop I don't know any details of the system,
Click to expand...

Thanks..I think I am thinking of a portable unit..smallish..I don't have a great deal of room in my shop/garage. Several manufacturers make models that would suit me. Dayton makes one..single speed fan..would it suck shielding gas away from the puddle?..I don't know.
 
deuce said:
Thanks..I think I am thinking of a portable unit..smallish..I don't have a great deal of room in my shop/garage. Several manufacturers make models that would suit me. Dayton makes one..single speed fan..would it suck shielding gas away from the puddle?..I don't know.
Click to expand...
I would think that a fan or vacuum unit that created any type of breeze would affect the shielding gas. Piped in air to a helmet would solve the problem without messing with the shielding gas.
Rut
https://www.turbineproducts.com/bre...r-respirator-w-auto-darkening-welding-helmet/
 
You may want to post that question on a welding forum.

I would think that if you situated the Dayton nozzle a feet or two from your work but close enough to get the fumes you should be OK.\

I used a box fan to create a draft when I did a lot of welding. I was in the garage so it was not a problem getting fumes in the house.

David
 
Rut said:
I would think that a fan or vacuum unit that created any type of breeze would affect the shielding gas. Piped in air to a helmet would solve the problem without messing with the shielding gas.
Rut
https://www.turbineproducts.com/bre...r-respirator-w-auto-darkening-welding-helmet/
Click to expand...

Thanks for the idea. Ideal probably for a stationary platform, but getting into tight spaces..footwell of my tr3 for instance, I think would be tough...and taking off the hood, I would be back in the fumes and they are really starting to bother me. Good idea though. Looking at an Ace unit now..2 speeds. Pricey but I only have one set of lungs left
 
Back
Top