Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
EWD
Jedi Hopeful
Offline
In the middle of reassembling my front suspension. 2 questions:
1. Trunion - Installing new parts. Having a problem getting the metal sleeve into the bushings. It goes easily into one side (using a vise press) but will not start into the next bushing. The sleeve catches on the edge of the bushing. (Have also tried using a bolt/washers/nut to drive it through with a drill with the same result).
2. installing new upper ball joints from Moss which come greased and sealed with no zerk. Moss recommends to keep them sealed. Thoughts?
Thanks,
Will
1. Trunion - Installing new parts. Having a problem getting the metal sleeve into the bushings. It goes easily into one side (using a vise press) but will not start into the next bushing. The sleeve catches on the edge of the bushing. (Have also tried using a bolt/washers/nut to drive it through with a drill with the same result).
2. installing new upper ball joints from Moss which come greased and sealed with no zerk. Moss recommends to keep them sealed. Thoughts?
Thanks,
Will